Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Light Switch Lever on a Renault Twingo

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Checks and maintenance

See other generations:
Video tutorial

Before you begin, sit in the driver's seat of your Renault Twingo. Start by removing the steering column cover by unscrewing the fixing screws.

Next, unscrew and remove the screw that secures the light switch lever to the steering column. This will free the switch itself.

Proceed to disconnect the electrical connector, and you will have completed the disassembly. To install the new light switch lever, follow this procedure in reverse, and you will have completed the replacement.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a Renault Twingo 3
How to Replace the Cabin Air Filter in a Renault Twingo 3
Renault Twingo (2014-2024 / Twingo III, Twingo 3) If you want to replace the cabin air filter in your Renault Twingo third series, simply follow the steps described. First, purchase a new air filter …
How to Replace the Battery in a Renault Twingo
How to Replace the Battery in a Renault Twingo
Renault Twingo (2014-2024 / Twingo III, Twingo 3) To replace the battery in a Renault Twingo, open the bonnet to access the components in the engine bay. On the left side, locate the battery, connect…
How to Dismantle the Starter Motor on the Renault Twingo
How to Dismantle the Starter Motor on the Renault Twingo
Renault Twingo (2014-2024 / Twingo III, Twingo 3) Here are the instructions to dismantle and replace the starter motor on the Renault Twingo. First, open the bonnet and start by removing the air filt…

    Frequently Asked Questions

    • Twingo 1993-2007 - Where is the OBD port on the Renault Twingo located? Read answer

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos