Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear seats of the Renault Twingo

Model: Renault Twingo Twingo 3, Twingo III - Years 2014-2024
Part: Seat

Below are the instructions on how to disassemble and replace the rear seats of the Renault Twingo. First, open the rear doors of the car and start unscrewing the fixing screws found under the seat; pull the seat upwards to remove it, as shown in the video. Then open the rear hatch of the trunk and unscrew the screws found at the base of the backrests, removing them as well; then proceed with the repair or replacement of the rear seats, fixing the backrests in order and then the seat.

Posted on 21 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seats on the Renault Twingo
How to Remove the Rear Seats on the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) This tutorial shows how to remove the rear seats on the Renault Twingo, an extremely simple and quick operation. First, open both doors, then move th…
Internal modularity of the Renault Twingo
Internal modularity of the Renault Twingo
Renault Twingo (2014-2024 / Twingo 3, Twingo III) In this video we can see how the interior of the Renault Twingo III is modular according to one's needs: the rear engine allows it to have a flat flo…
How to Dismantle the Starter Motor on the Renault Twingo
How to Dismantle the Starter Motor on the Renault Twingo
Renault Twingo (2014-2024 / Twingo 3, Twingo III) Here are the instructions to dismantle and replace the starter motor on the Renault Twingo. First, open the bonnet and start by removing the air filt…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos