Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Seat from a Renault Twingo

Model: Renault Twingo Twingo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Seat

See other generations:
Video tutorial

In this video tutorial, we will see how to remove the front seat from a second-generation Renault Twingo in simple steps. First, open the front door and remove the cap located under the vehicle's body, at seat height; then unscrew the fastening nut inside using a socket wrench.

At this point, unscrew the additional nuts found inside the heat shield, and then lift the seat to disconnect the electrical connector located underneath; all that’s left is to remove the seat!


Updated on 2 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Seat of the Renault Twingo
How to Remove the Front Seat of the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) To remove the front seat of the Renault Twingo, loosen the bolts securing the seat, located at the front and rear. Once these bolts are loosened, dis…
How to Remove the Front Seat of the Renault Twingo
How to Remove the Front Seat of the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) Today's guide will show you the main instructions for removing and replacing the front seat of the Renault Twingo. First, open the front door and sta…
How to remove the front seat of a Renault Twingo?
How to remove the front seat of a Renault Twingo?
Renault Twingo (2014-2024 / Twingo III, Twingo 3) To disassemble the front seat of a Renault Twingo, start by disconnecting the battery to avoid short circuits, especially if the seat is equipped wit…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos