Do it yourself
Frequently asked questions about cars and motorcycles

How to repair bodywork damage with a spray can

Model: Renault Twingo Twingo 3, Twingo III - Years 2014-2024
Part: Body

To touch up a small bodywork damage with a spray can, we must follow the precise instructions of the youtuber, which we can summarize in a preparation phase where we must clean with water and soap, sand with 320 and then 450 sandpaper to level the scratches, and then mask the nearby areas with protective body shop tape. We apply a coat of primer (2 very light coats, as shown), then sand with 600 grit sandpaper to smooth the area and blend the edges with 1000 or even 2000 grit sandpaper. Now we wrap the tape by rolling it outwards, so that the paint can wrap around the edge without creating a sharp line. We must roll the outer edge of the tape outwards, creating a rounded edge instead of a straight edge, so that the adhesive of the tape remains exposed. This creates a natural faded effect. We paint giving 3 coats: adhesion, coverage, finish. Let it dry for 24 hours and then polish with abrasive paste to even out. Remove the masking tape.

Posted on 6 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Renault Twingo (2014-2024 / Twingo 3, Twingo III) The inflation kit of the Renault Twingo is useful in emergency situations to repair a damaged tire. To use the kit, you must pull over the vehicle to…
Renault Twingo (2007-2014 / Twingo 2) In this video we can see how to repair the horn of a Renault Twingo II: the horn of this car is operated from the satellite located on the turn signa…
Renault Twingo (2014-2024 / Twingo 3, Twingo III) In this video we can see how to repair the cabin fan of a Renault Twingo. In the functionality test, we can see that it does not work at all, so the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos