Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to repair the Renault Twingo's heating fan

Model: Renault Twingo Twingo 3, Twingo III - Years 2014-2024
Part: Blower motor

In this video we can see how to repair the cabin fan of a Renault Twingo. In the functionality test, we can see that it does not work at all, so the first thing the youtuber checks is the functionality of the fuse. In reality there are two, 24 and 28, but both are working, so we need to check the electrical connections. We need to disconnect the battery because we need to remove the side airbag, and then remove the glove compartment, so that we can see the fan on the left, and check that the current is reaching the red and black wires that lead to the fan normally; so the problem is the connections, so before changing the fan it is better to change the connector and do a functionality test.

Posted on 5 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the cabin fan resistor of the Renault Twingo
Replacement of the cabin fan resistor of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) In this guide we will see the information related to disassembly and replacement of the cabin fan resistor of the Renault Twingo. First, we get on bo…
Removing the Cabin Fan of the Renault Twingo
Removing the Cabin Fan of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) Today, let’s discover the main steps to remove and replace the cabin fan of the Renault Twingo. First, get inside the vehicle and start removing the …
How to disassemble the cabin fan of the Renault Twingo
How to disassemble the cabin fan of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) Below we will see the instructions that will allow us to disassemble and replace the cabin fan of the Renault Twingo. First of all, we get on board t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos