Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the passenger airbag in the Renault Twingo?

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Airbag

In this tutorial we can see how to remove the passenger airbag in the Renault Twingo, an extremely simple and quick operation. Before proceeding, make sure the key is not inserted, open the hood and disconnect the negative terminal of the battery, in order to avoid accidental activation of the airbag itself. Start by going to the passenger side, then open the glove compartment, locate the two nuts on the upper side of the compartment and unscrew them with a socket wrench. Then pry along the perimeter of the airbag with a plastic spatula, separate it from the dashboard and disconnect the power connector.

Posted on 24 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Deactivating the Passenger Airbag
Deactivating the Passenger Airbag
Renault Twingo (2014-2024 / Twingo 3, Twingo III) Deactivating the passenger airbag is a procedure that is practically identical across all modern cars. As an example, we will show you on a Renault T…
How to Disable the Passenger Airbag on the Renault Twingo II
How to Disable the Passenger Airbag on the Renault Twingo II
Renault Twingo (2007-2014 / Twingo 2) In this video, learn how to disable the passenger airbag on the Renault Twingo II. This operation is necessary when transporting a child in the front…
How to remove the passenger airbag on a Renault Twingo
How to remove the passenger airbag on a Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) Today we will explain how to remove the passenger airbag on a Renault Twingo. To remove the airbag, we need to climb onto the edge of the vehicle and…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos