Do it yourself
Frequently asked questions about cars and motorcycles

How to use the tire inflation kit of the Renault Twingo

Model: Renault Twingo Twingo III, Twingo 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Checks and maintenance

See other generations:
Video tutorial

The inflation kit of the Renault Twingo is useful in emergency situations to repair a damaged tire. To use the kit, you must pull over the vehicle to the side of the road and leave the engine running, turn on the hazard lights, and engage the parking brake.

The kit is located under the passenger side footrest; to access it, you need to remove the two screws. Connect the compressor hose to the canister and screw the canister onto the compressor; connect the inflation end of the canister to the tire valve and plug the electric cable into the cigarette lighter socket.

Referring to the inflation values indicated on the driver's door, start the compressor. This repair is only temporary and allows you to drive at a maximum speed of 80 km/h and cover a distance of no more than 200 km. It is essential to have the tire repaired or replaced by a qualified service as soon as possible.


Posted on 20 September 2025 by ScegliAuto


Related tutorials

Renault Twingo (2014-2024 / Twingo III, Twingo 3) Let's see where the tyre inflation kit is located on the Renault Twingo III. On this vehicle, as with most modern cars, there is no spare wheel, not …
Renault Twingo (2014-2024 / Twingo III, Twingo 3) With this very useful video guide today, we can see all the diagrams for the fuse box of a Renault Twingo, third generation model produced from 2014 …
Renault Twingo (2014-2024 / Twingo III, Twingo 3) All the fuses of the Renault Twingo Z.E. are located inside the single fuse box installed in the vehicle: in this type of vehicle, the box is found w…

Other guides you may be interested in

    Frequently Asked Questions

    • Twingo 1993-2007 - Where is the OBD port on the Renault Twingo located? Read answer

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos