Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cigarette lighter fuse of the Renault Kangoo MK3

Model: Renault Kangoo KFK, MK 3, FFK - Years 2020-2026
Part: Cigarette lighter

The cigarette lighter socket is increasingly used to power small electrical devices, such as smartphones and tablets. This more frequent use increases the possibility that disconnecting these devices may cause a surge that triggers the protection fuse. If this were to happen, we open the compartment containing the fuses, in the dashboard to the left of the steering column, we locate the fuse corresponding to our device using the diagram found in the owner's manual, third from the left row at the bottom, remove it and replace it with a new 25A fuse, and close the plastic panel.

Posted on 12 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the 2002 Renault Kangoo?
Where is the fuse box located in the 2002 Renault Kangoo?
Renault Kangoo (1997-2008 / MK 1, KC, KW) Today we will see how to replace a fuse inside the visible fuse box located in the front hood of the 2002 Renault Kangoo. The fuse box is located nex…
How do you disassemble the heating controls in the Renault Kangoo 1?
How do you disassemble the heating controls in the Renault Kangoo 1?
Renault Kangoo (1997-2008 / MK 1, KC, KW) When we notice that hot air is not coming out of the car vents, despite activating the control, it could be due to various problems, including the br…
Fuse diagram for the 1999 Renault Kangoo
Fuse diagram for the 1999 Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) The Renault Kangoo is a commercial vehicle dating back to the 1990s but is still present on the roads today. If you own one, you may have encountered…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos