Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cigarette Lighter Socket in the Renault Kangoo?

Model: Renault Kangoo KC, MK 1, KW - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Cigarette lighter

See other generations:
Video tutorial

In this tutorial, you will learn how to remove the cigarette lighter socket in the Renault Kangoo, a very simple and quick operation. First, enter the cabin and locate the two screws on either side of the centre console, then undo them using a Torx T20 key. Next, detach the base of the gaiter with a flat-head screwdriver, remove the additional screws indicated, and take out the console itself.

At this point, simply disconnect the socket connector, pull the socket from its housing, and fit the replacement if necessary by following the reverse procedure.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

Where is the Cigarette Lighter Fuse in the Renault Kangoo?
Where is the Cigarette Lighter Fuse in the Renault Kangoo?
Renault Kangoo (1997-2008 / KC, MK 1, KW) If the cigarette lighter in the Renault Kangoo suddenly stops working, first check the status of the respective fuses, whose location is indicated in…
Fuse Diagram for the Renault Kangoo
Fuse Diagram for the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) The Renault Kangoo has two fuse boxes. The first is located in the engine compartment, positioned to the right of the battery, just in front of the d…
Where to Find the Fuse Boxes of the Renault Kangoo
Where to Find the Fuse Boxes of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) The Renault Kangoo has two fuse boxes. The first is located in the cabin, between the steering wheel and the driver's door. This box contains fuse no…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos