Do it yourself
Frequently asked questions about cars and motorcycles

How to Adjust the Handbrake on a Renault Clio

Model: Renault Clio Clio III, MK 3, Clio 3 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Parking brake

See other generations:
Video tutorial

In this tutorial, you will see how to adjust the handbrake on a Renault Clio, a very simple and quick operation. First, park the vehicle on a flat surface with the first gear engaged, then go to the rear seats, unscrew the two screws indicated with a Torx T20 key, and lift the cover of the centre tunnel.

Next, locate the adjustment nut, tighten it using a long 13mm socket wrench, and achieve the desired tension level. At this point, test the new adjustment on a suitable road, ensuring full safety.


Posted on 1 October 2026 by ScegliAuto


Related tutorials

Renault Clio (2005-2013 / Clio III, MK 3, Clio 3) To adjust the handbrake on the Renault Clio, lift the car with a jack so that the right rear wheel is off the ground. Once removed, free the bolts se…
Renault Clio (2012-2019 / MK 4, Clio IV, Clio 4) To adjust the handbrake on a Renault Clio, lift the car with a jack or ramp so that the right rear wheel is removed from its housing. After removing …
Renault Clio (2012-2019 / MK 4, Clio IV, Clio 4) To adjust the handbrake of the Renault Clio, loosen the screws securing the covering panel of the central tunnel: once these screws are loosened, you…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Change the Key Fob Battery for an Audi Q8?

To change the key fob battery for an Audi Q8, start by locating the release button on the key. Press this button to extract the emergency mechanical key. With the mechanical key removed, find the visible slot in the key body. Use a small flathead screwdriver or a plastic tool to gently pry open the key fob shell. Once the shell is open, you will find the battery, usually a CR2032. Note the orientation of the battery before removing it. Remove the old battery and insert the new one, ensuring the positive (+) side is oriented correctly. Reassemble the key fob shell, making sure all pieces fit together snugly. Finally, reinsert the mechanical key into its housing. Your key should now function properly with the new battery.

Watch the video!


by ScegliAuto

More videos