Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seat of the Renault Twingo

Model: Renault Twingo Twingo 1 - Years 1993-2007
Part: Seat

Today's guide will show you the main instructions for removing and replacing the front seat of the Renault Twingo. First, open the front door and start unscrewing all the fastening screws found on the seat rails, moving the seat forwards and backwards to uncover all the screws. Use a ratchet spanner to unscrew them, as shown in the video. Next, disconnect the connector located under the seat, lifting it and removing it from the cabin. To reassemble the front seat, simply apply the reverse procedure!

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front seat of a Renault Twingo?
How to remove the front seat of a Renault Twingo?
Renault Twingo (2014-2024 / Twingo 3, Twingo III) To disassemble the front seat of a Renault Twingo, start by disconnecting the battery to avoid short circuits, especially if the seat is equipped wit…
Removing the Front Seat from a Renault Twingo
Removing the Front Seat from a Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) In this video tutorial, we will see how to remove the front seat from a second-generation Renault Twingo in simple steps. First, open the front door …
How to remove the front seat of the Renault Twingo
How to remove the front seat of the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) In this guide, you will learn how to remove and replace the front seat of the Renault Twingo by following these simple and quick steps. First, open t…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos