Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seat in a Renault Twingo?

Model: Renault Twingo Twingo 1 - Years 1993-2007
Part: Rear bench seat

In this tutorial, you will see how to remove the rear seat in a Renault Twingo, an extremely simple and quick operation. First, open both rear doors. Then, using a socket spanner, undo the two securing nuts located on the lower edge of the seat. Next, grasp the seat from the brackets, lift it, move into the boot, and operate the central lever. At this point, simply extract the seat from the cabin, position the replacement if necessary, and refit it by following the reverse procedure.

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front seat of a Renault Twingo?
How to remove the front seat of a Renault Twingo?
Renault Twingo (2014-2024 / Twingo 3, Twingo III) To disassemble the front seat of a Renault Twingo, start by disconnecting the battery to avoid short circuits, especially if the seat is equipped wit…
How to remove the rear seats of the Renault Twingo
How to remove the rear seats of the Renault Twingo
Renault Twingo (2014-2024 / Twingo 3, Twingo III) Below are the instructions on how to disassemble and replace the rear seats of the Renault Twingo. First, open the rear doors of the car and start un…
How to Remove the Front Seat of the Renault Twingo
How to Remove the Front Seat of the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) To remove the front seat of the Renault Twingo, loosen the bolts securing the seat, located at the front and rear. Once these bolts are loosened, dis…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos