Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the car radio in the Renault Twingo?

Model: Renault Twingo Twingo 3, Twingo III - Years 2014-2024
Part: Car stereo

In this tutorial, we can see how to replace the car radio in the Renault Twingo, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then unclip both the frame of the air conditioning console and the upper cover of the steering column. Next, unscrew all the screws that have just been released, remove the entire dashboard trim, and unscrew the radio fixing screws. At this point, all that remains is to remove the module from the housing, disconnect the connectors, install the replacement, and reassemble everything following the reverse procedure.

Posted on 21 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Standard Stereo in a Renault Twingo
How to Replace the Standard Stereo in a Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) Let's discover the main information needed to remove and replace the standard stereo in a Renault Twingo. First, get inside the vehicle and start by …
How to Enter the Radio Code on a Renault Twingo
How to Enter the Radio Code on a Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) In this video, learn how to enter the radio code after removing the battery or replacing the stereo on a Renault Twingo. This is a very simple operat…
How to Replace and Install the Radio in the Renault Twingo
How to Replace and Install the Radio in the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) The instructions in this guide will show you how to replace and install the radio in the Renault Twingo. First, get inside the cabin and start by rem…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos