Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Renault Twingo 1

Model: Renault Twingo Twingo 1 - Years 1993-2007
Part: Car stereo

This video provides step-by-step instructions for removing the original radio from the first generation Renault Twingo. First, get inside the vehicle and start removing the radio; use the appropriate radio removal tools, inserting them into the holes and pushing, as illustrated in the video. Next, disconnect the electrical connectors found at the back; then, you can reassemble everything: the installation of the original radio from the second generation Twingo is shown below!

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Enter the Radio Code on a Renault Twingo
How to Enter the Radio Code on a Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) In this video, learn how to enter the radio code after removing the battery or replacing the stereo on a Renault Twingo. This is a very simple operat…
How to Easily Remove the Radio from the Renault Twingo
How to Easily Remove the Radio from the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) To correctly remove the stock radio from your Renault Twingo Mk2, there is no need to remove any part of the dashboard, making this operation easily …
How to Unlock the Radio on the Renault Twingo
How to Unlock the Radio on the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) Below, we will outline the procedure to unlock the standard radio of the Renault Twingo, specifically unlocking the radio stations. First, get inside…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos