Do it yourself
| ||||
|
Renault Twingo - Video tutorial
Model: Renault Twingo
Twingo 1
- Years 1993-2007 Let's briefly see in this guide the steps that will allow us to disassemble and replace the steering wheel of the Renault Twingo. First, we open the engine hood and disconnect the battery as a precaution; then we get into the car and start dismantling and removing the driver's airbag, disconnecting the electrical connector that we find on the back, as shown in the video. At this point, we unscrew the central screw of the steering wheel, using a T50 torx key, in order to remove it; we remove it in the central position to have a reference on how to install the next steering wheel.
Posted on 22 October 2023 by ScegliAuto
Other guides that may interest you
|
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.073
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |