Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Twingo
    4. : Replacing the airbag on Renault Twingo

Renault Twingo - Video tutorial

Model: Renault Twingo Twingo 3, Twingo III - Years 2014-2023
Part: Airbags
Operation: Replacing the airbag on Renault Twingo

Replacing the airbag on Renault Twingo is really very simple. For safety reasons, we recommend that you disconnect the battery under the hood. In this regard, remember to always unscrew the negative pole first and only then the positive. Once this is done, get in the car in the driver's seat. As shown in the video, push the two metal clips behind the steering wheel with a flat screwdriver until the airbag comes out of its seat. Disconnect the rear cable and connect it to the new airbag. To assemble this, you just have to push it into place with your hands until it clicks into place.


Posted on 3 February 2024 by ScegliAuto



Passenger airbag deactivation
Renault Twingo (2014-2023 / Twingo 3, Twingo III) Deactivating the passenger airbag is practically the same procedure on all modern cars. We, as an example, show you a Renault Twingo. The operation m
How to deactivate the passenger airbag of the Renault Twingo II.
Renault Twingo (2007-2014 / Twingo 2) In this video, we will see how to deactivate the passenger airbag of the Renault Twingo II: this is an operation that becomes necessary if we need to
Guide to disassembling the airbag and steering wheel of the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) Let's briefly see in this guide the steps that will allow us to disassemble the airbag and the driver's steering wheel of the Renault Twingo. First w

Other guides that may interest you

    Frequently Asked Questions

    • Twingo 2014-2023 - What does the Renault Twingo airbag warning light indicate? Read Answer
    • Twingo 2007-2014 - Where is the inertia switch of the Renault Twingo II? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos