Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on the Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tire pressure warning light

Video tutorial

The tire pressure warning light, also known as the TPMS light, monitors the pressure of the tires on the road; in case the light activates on the car's instrument panel, it means that it is necessary to check the pressure of one or more tires. To reset the light on a Jeep Renegade vehicle, we must adjust the tire pressure, following the instructions provided on a label placed by the manufacturer on the front left door.

Then we get into the vehicle and drive for a couple of kilometers to reset the light. It is important to remember that tire pressure can vary with changes in air temperature.


Posted on 21 October 2025 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on a Jeep Renegade
How to Reset the TPMS Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Resetting the TPMS light, which relates to tyre pressure on a Jeep Renegade, involves very simple and quick steps that you can perform independently,…
How to reset the TPMS light on a Jeep Renegade
How to reset the TPMS light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) The lighting of the tire pressure warning light indicates that it is necessary to go to a workshop or a service station to inflate the tires. To adju…
TPMS: How to Reset the Tyre Pressure Sensor on the Jeep Renegade
TPMS: How to Reset the Tyre Pressure Sensor on the Jeep Renegade
Jeep Renegade (2014-2024 / ) On the Jeep Renegade, resetting the TPMS is done after adjusting the pressures according to the chart on the door pillar. With the Jeep Renegade stat…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos