|
Do it yourself
| |||
| ||||
TPMS replacement and programming procedure with ThinkTool TP T90
Model: Jeep Renegade
520, MK 1, BU
- Years 2014-2026
In this video, we see how the TPMS relearning procedure is carried out using the ThinkTool TP 90 tool. We can find this tool paired with 4 sensors, for example on AliExpress with the code 1005006345801788 at a price of 95.10 euros, with free delivery. We will read the sensor module through the tool and the OBD port, and we will read the ID stored on the module. We then approach the sensor we have installed and write the ID previously read from the module; it is not necessary to do the learning process, but it may be necessary to take a short drive to allow the vehicle to learn the correct tire pressure. It may also be possible to retrieve the ID stamped on the old sensor, and through our tool in manual mode, we enter the sensor code. If this is not possible, we must proceed with automatic creation, assigning a random ID to the sensor, which will then be recognized by the vehicle. There are three types of learning procedures, which vary according to the type of vehicle (each model has its own). On this Jeep Renegade, the mode is through OBD, so professional equipment as seen in the video is necessary. Remember that old sensors must be removed from the vehicle, as they could cause anomalies.
Posted on 17 June 2025 by ScegliAuto
Video tutorial
Related tutorials
Jeep Renegade
(2014-2026 /
520, MK 1, BU)
These brief instructions will show you the main steps to program the remote key of the Jeep Renegade. To perform the programming, you will need the a…
Jeep Renegade
(2014-2026 /
520, MK 1, BU)
To reset the TPMS light on a Jeep Renegade, first adjust the pressure of all tyres according to the manufacturer's specifications. Next, turn on the …
Jeep Renegade
(2014-2024 /
)
On the Jeep Renegade, resetting the TPMS is done after adjusting the pressures according to the chart on the door pillar. With the Jeep Renegade stat…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.187
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |