Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to find the tire pressure sticker on the Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Tires

Where is the sticker with the tire pressure, recommended by the Manufacturer, on the Jeep Renegade? We see it in this video. The sticker is located in the lower part of the driver's door pillar. On this sticker we will find the recommended pressure for the front and rear tires, both at full load and with only the driver. Usually the pressures are expressed in both PSI (pounds per square inch) which is the unit of measurement used in Anglo-Saxon countries, and in BAR, which is the unit of measurement used in the European Union, and is therefore the unit of measurement that interests us.

Posted on 29 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on a Jeep Renegade
How to Reset the Tyre Pressure Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In today's video tutorial, learn how to reset the tyre pressure light on a Jeep Renegade. It is really simple, but before performing the reset, ensur…
How do you reset the tire pressure warning light on the Jeep Renegade?
How do you reset the tire pressure warning light on the Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) To reset the tire pressure warning light of the Jeep Renegade, you need to inflate the tires until they reach the recommended pressure value: this va…
How to Reset the Tyre Pressure Warning Light on a Jeep Renegade
How to Reset the Tyre Pressure Warning Light on a Jeep Renegade
Jeep Renegade (2014-2021 / ) The tyre pressure monitoring system of a Jeep Renegade monitors tyre pressure. If the TPMS warning light appears on the vehicle display, it means you…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos