Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on a Hyundai I20

Model: Hyundai I20 GB, IB, MK 2 - Years 2014-2021
Part: Warning light – error code

The TPMS light of the 2018 Hyundai I20 must be reset after the tire pressure has been adjusted. To reset the TPMS light, we must: - start the car; - drive about 20 kilometers to reset the light; Once the two reset steps have been completed, you can turn off the car. If the light does not reset and continues to flash, it means that one of the tire pressures is not correct. When adjusting tire pressure, it is necessary to follow the instructions provided by the manufacturer, which are usually found on a sticker located on the door frame.

Posted on 16 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on the Hyundai I20
How to reset the TPMS light on the Hyundai I20
Hyundai I20 (2008-2014 / MK 1, PB) Today we will explain how to reset the TPMS light on the Hyundai I20. To reset the light, we need to turn on the instrument panel and press the menu …
How to reset the TPMS light on the Hyundai I20
How to reset the TPMS light on the Hyundai I20
Hyundai I20 (2014-2021 / GB, IB, MK 2) The TPMS sensor, related to tire pressure, on a 2017 Hyundai I20 vehicle is reset after the tire pressure has been adjusted. To adjust tire pressure,…
How to Reset the Tyre Pressure Light on the Hyundai i20
How to Reset the Tyre Pressure Light on the Hyundai i20
Hyundai I20 (2014-2021 / GB, IB, MK 2) These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset,…

    Frequently Asked Questions

    • Hyundai I20 2014-2021 - How does the sos light work on the Hyundai I20? Read answer
    • Hyundai I20 2014-2021 - What does the ESP warning light indicate in a 2015 Hyundai i20? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos