Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. C Hr
    4. : How to configure the tires in case we also change the rims on the Toyota C-HR

Toyota C Hr - Video tutorial

Model: Toyota C Hr Ax10, Ax50, MK 1 - Years 2016-2023
Part: Wheel
Operation: How to configure the tires in case we also change the rims on the Toyota C-HR

If we have chosen to fit a summer tire kit also changing the rims, then we have to reconfigure all the sensor calibration, because it will be different from that of the winter tires with its rims. We will get help from a tool, which we can also find on Amazon: the simplest type costs 14.99 euros, then if we want a device more similar to that of our youtuber we have to look for it on Wish Foxwell t100 for 115.10 euros. The device reads the tire valve code, and from there it reads all the tire data. Now we can mount them on the car. Then we will connect the diagnostic tool to the EOBD socket and do the self-diagnosis. Now we have to take the road learning test which confirms that everything went well.


Posted on 26 November 2022 by ScegliAuto



How to reset tire pressure sensor on Toyota Chr
Toyota C Hr (2016-2023 / Ax10, Ax50, MK 1) If the low tire pressure warning light comes on on the instrument panel of your car, you must proceed to check all four tires and their relative infl
How to reset Toyota CH-R - RAV4 to factory settings
Toyota C Hr (2016-2023 / Ax10, Ax50, MK 1) In this short and simple guide we will see how to reset or restore the factory settings of the Toyota CH-R, but also of the RAV4. First of all we get
How do you reset the tire pressure warning light on the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, Ax50, MK 1) On the Toyota C-HR, the tire pressure warning light can be reset by first inflating the tires to the recommended pressure value: this value is indica

How to manually open the door of the Volkswagen Polo

If the smart key of your Volkswagen Polo has stopped working and you are unable to open the car door then you just have to put into practice the instructions described in the following mini guide. First take your key, press the metal button located at the top and take out the physical emergency key. Immediately after, go to the door handle, pull it with your hand and at the same time remove the plastic side part. Once this is done, insert the key into the key slot and turn it to unlock the door.

Watch the video!


by ScegliAuto

More videos