Do it yourself
Frequently asked questions about cars and motorcycles
In this short guide, we will discover the instructions that will allow us to dismantle and replace the gear lever on the Keeway RKS 125 motorcycle in simple steps. First, place the motorcycle on a stand and start by unscrewing the bolt of the gear lever support bracket; disconnect the rod from the lever pin to remove the gear lever, as illustrated in the video. At this point, carry out the repair or replacement of the lever, ensuring that the pin protruding from the gearbox is in good condition; reassemble and correctly adjust the new gear lever!

Posted on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Rks 125 To replace the position bulb on the Keeway RKS 125, you need to loosen the screws that secure the front fairing: there will be two screws located jus…
Rks 125 This guide shows how to perform routine maintenance by changing the engine oil and oil filter on the Keeway RKS 125. First, place the bike on its cen…
Rks 125 Changing the engine oil in the Keeway RKS 125 is an extremely simple and quick operation; let's see how to proceed in this tutorial. First, wait for …

How to Replace the Clutch Cable on the Royal Enfield Classic 350

In this guide, you will learn how to remove and replace the clutch cable on the Royal Enfield Classic 350 motorcycle. First, place your bike on the centre stand and begin unscrewing the adjuster located above the clutch cover on the left side; then detach the cable. Next, remove the cable from the clutch lever, pulling it out along with the outer casing. Now, replace it with the new, correct type, connecting the cable to the clutch lever. Finally, adjust the clutch to set the disengagement.

Watch the video!


by ScegliAuto

More videos