Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Keeway Rks 125
Part: Engine oil

Changing the engine oil in the Keeway RKS 125 is an extremely simple and quick operation; let's see how to proceed in this tutorial. First, wait for the engine to cool down sufficiently, then position a container underneath it, locate the drain bolt, and unscrew it using a socket wrench. Once all the oil in the system has drained out, proceed by opening the cap of the filter housing, removing the filter, and reassembling everything. Finally, insert the required amount of oil through the designated upper hole.

Updated on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on Keeway RKS 125
Rks 125 This guide shows how to perform routine maintenance by changing the engine oil and oil filter on the Keeway RKS 125. First, place the bike on its cen…
How to change the engine oil and oil filter on a Keeway RKS 125
How to change the engine oil and oil filter on a Keeway RKS 125
Rks 125 In this guide, we will discover how to perform routine maintenance by changing the engine oil and oil filter on a Keeway RKS 125 motorcycle. First, p…
How do you disassemble the engine of the Keeway RKS 125?
How do you disassemble the engine of the Keeway RKS 125?
Rks 125 In order to disassemble the engine of the Keeway RKS 125, you must loosen the screws that secure it to its housing: subsequently it will also be poss…

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos