Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda X Adv
Part: Transmission

In this tutorial, we can see how to reset the DCT gearbox on the Honda X-ADV 750 scooter, an extremely simple and quick operation to be carried out, for example, as an attempt to solve a problem or following a change of ownership. Before doing this, make sure that the gear is in neutral and that the scooter is on the stand. Start by holding down the D button, then turn on the instrument panel and follow this sequence of buttons: D, D, N, D, N. Start the engine afterwards, wait at least thirty seconds, and complete the procedure by restarting the scooter.

Posted on 27 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the time on the Honda X-ADV 750 scooter?
How to adjust the time on the Honda X-ADV 750 scooter?
X Adv .. we can see how to adjust the time on the Honda X-ADV 750 scooter, an extremely simple and quick operation, to be carried out for example after disconnecting.. …
How to replace the battery in the Honda X-ADV 750 scooter?
How to replace the battery in the Honda X-ADV 750 scooter?
X Adv .. see how to replace the battery in the Honda X-ADV 750 scooter, an extremely simple and quick operation. First of all, make sure that the instrument.. …
How to replace the engine oil in the Honda X-ADV 750 scooter?
How to replace the engine oil in the Honda X-ADV 750 scooter?
X Adv .. see how to replace the engine oil in the Honda X-ADV 750 scooter, an extremely simple and quick operation. First of all, make sure that the engine is.. …

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos