Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda X Adv
Part: Engine oil

In this tutorial we can see how to replace the engine oil in the Honda X-ADV 750 scooter, an extremely simple and quick operation. First of all, make sure that the engine is cold enough, so that you can work in complete safety, then remove the lower cover and place a container underneath the scooter. Next, locate the drainage hole bolt, unscrew it using a socket wrench and wait for all the oil to drain out of the system. At this point, all that's left to do is to unscrew the old filter, tighten both the replacement and the bolt, and pour the required amount of oil through the appropriate hole.

Posted on 27 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the motor oil in the Honda X-ADV 750 scooter?
How to replace the motor oil in the Honda X-ADV 750 scooter?
X Adv .. In this tutorial we can see how to replace the engine oil in the Honda X-ADV 750 scooter, an extremely simple and quick operation... …
How to reset the DCT gearbox in the Honda X-ADV 750 scooter?
How to reset the DCT gearbox in the Honda X-ADV 750 scooter?
X Adv .. see how to reset the DCT gearbox on the Honda X-ADV 750 scooter, an extremely simple and quick operation to be carried out, for example, as an attempt.. …
How to adjust the time on the Honda X-ADV 750 scooter?
How to adjust the time on the Honda X-ADV 750 scooter?
X Adv .. we can see how to adjust the time on the Honda X-ADV 750 scooter, an extremely simple and quick operation, to be carried out for example after disconnecting.. …

How to Replace the Air Filter on a Triumph Bonneville T120?

As shown in this tutorial, replacing the air filter on a Triumph Bonneville T120 is extremely simple and quick. First, wait for the engine to cool down, then grasp both covers located under the seat and separate them from the frame. Next, remove the aluminium airbox covers by unscrewing the relevant bolts and disconnect both hoses. At this point, unscrew the single screw on the box cap, extract the old filter, and insert the replacement. To reassemble, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos