Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this guide, you will discover the instructions for dismantling and repairing the gearbox of the MV Agusta Turismo Veloce 800. First, place the motorcycle on a stand and start by unscrewing the oil drain bolt, allowing it to drain into a container for about ten minutes. Next, unscrew the screws of the clutch cover, removing the entire kit as shown in the video. At this point, unscrew the screws of the transmission, disconnecting the chain from the sprocket; carry out the repair or replacement of components, following the video tutorial to the end!

Posted on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the side fairings of the MV Agusta Turismo Veloce 800.
How to remove the side fairings of the MV Agusta Turismo Veloce 800.
Turismo Veloce In this brief guide, we will see the instructions that will allow us to remove the side panels of the MV Agusta Turismo Veloce 800 motorcycle. First,…
How to Remove the Sprocket Cover of the MV Agusta Turismo Veloce 800
How to Remove the Sprocket Cover of the MV Agusta Turismo Veloce 800
Turismo Veloce In this tutorial, you will learn how to remove the side cover of the sprocket to access the transmission chain or the sprocket itself of the MV Agust…
How to Remove and Refit the Passenger and Rider Seat of the MV Agusta Turismo Veloce 800
How to Remove and Refit the Passenger and Rider Seat of the MV Agusta Turismo Veloce 800
Turismo Veloce In this brief and simple guide, we will see how to remove and refit the passenger and rider seat of the MV Agusta Turismo Veloce 800. First, place yo…

How to Reset the Service Light on the Yamaha Xmax 250?

To reset the service light on the Yamaha Xmax 250, you need to insert the ignition key into the appropriate slot, so that you can turn it and switch on the instrument panel. Once this is done, press and hold the central button located on the left side of the instrument panel: the button should be held for about 20 seconds. When released, you will notice that the flashing service light has turned off: to verify that the reset has occurred correctly, you will need to switch off and then switch on the vehicle's instrument panel.

Watch the video!


by ScegliAuto

More videos