Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will learn how to remove the side cover of the sprocket to access the transmission chain or the sprocket itself of the MV Agusta Turismo Veloce 800. First, place your bike on a stand and start unscrewing the fastening screws of the side cover of the transmission using an Allen key; once removed, you can perform maintenance and lubrication on the chain and sprocket, removing it if necessary. Then, remount the sprocket cover, tightening the screws of the cover correctly, following the video until the end!

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Gearbox from the MV Agusta Turismo Veloce 800
How to Remove the Gearbox from the MV Agusta Turismo Veloce 800
Turismo Veloce In this guide, you will discover the instructions for dismantling and repairing the gearbox of the MV Agusta Turismo Veloce 800. First, place the mot…
How do you replace the motor oil of the MV Agusta Turismo Veloce 800?
How do you replace the motor oil of the MV Agusta Turismo Veloce 800?
Turismo Veloce It will be possible to replace the MV Agusta Turismo Veloce 800 by loosening the oil drain plug located in the central lower part of the vehicle: onc…
How to Remove and Refit the Passenger and Rider Seat of the MV Agusta Turismo Veloce 800
How to Remove and Refit the Passenger and Rider Seat of the MV Agusta Turismo Veloce 800
Turismo Veloce In this brief and simple guide, we will see how to remove and refit the passenger and rider seat of the MV Agusta Turismo Veloce 800. First, place yo…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos