Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Front Headlamp Bulb of the Ducati Monster 696

Model: Ducati Monster 696
Part: Headlight bulb

Video tutorial

Today's instructions will show you the main steps for removing and replacing the front headlamp bulb of the Ducati Monster 696 motorcycle. First, place the motorcycle on its stand and start removing the front optical unit; to do this, unscrew the fixing screws located between the headlamp and the instrument panel, and then on the sides of the lamp, as shown in the video.

At this point, disconnect the electrical connector of the bulb and then detach the bulb from the headlamp to remove it and replace it with a new one that has the same fitting, finally reassembling the optical unit!


Updated on 29 August 2026 by ScegliAuto


Related tutorials

Replacing Front Headlamp Bulb on Ducati Monster
Replacing Front Headlamp Bulb on Ducati Monster
Monster 696 In this video tutorial, you will learn how to remove and replace the front headlamp bulb on a Ducati Monster 696. First, unscrew the screws of the pl…
How to Replace the Front Headlight Bulb of the Ducati Monster 696
How to Replace the Front Headlight Bulb of the Ducati Monster 696
Monster 696 Today, we will go through the steps to remove and replace the front headlight bulb of the Ducati Monster 696, following the instructions below. First…
Replacing the Headlight Bulb of the Ducati Monster 696
Replacing the Headlight Bulb of the Ducati Monster 696
Monster 696 Below are the steps on how to dismantle and replace the headlight bulb of the Ducati Monster 696 motorcycle. First, place the motorcycle on a stand a…

How to Clean the Carburettor on an LML Star?

To clean the carburettor on an LML Star, you first need to remove this part from its housing: to disassemble the carburettor, you must remove the right side panel of the scooter, near the rear wheel. Once this panel is removed, you will locate the carburettor underneath by unscrewing the appropriate fixing screws. Then, disconnect the fuel lines and completely remove the carburettor: you can now clean it with a blast of compressed air, then refit all the removed components.

Watch the video!


by ScegliAuto

More videos