Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the engine of the Peugeot Speedfight?

Model: Peugeot Speedfight
Part: Engine

Video tutorial

The engine of the Peugeot Speedfight can be disassembled by loosening the screws that fix it to its housing in the center of the frame, also disconnecting the intake and exhaust manifolds and disconnecting the cables related to its sensors. At this point, it will be possible to open the engine block by loosening the screws that fix the cylinder and the cylinder head, so that it is possible to access the piston: the latter can be detached from the connecting rod and access to the crankshaft can be obtained.

Once all the necessary parts have been replaced, it will be possible to close the block by verifying that everything works.


Posted on 23 December 2024 by ScegliAuto


Related tutorials

How do you disassemble the engine of the Peugeot Speedfight?
How do you disassemble the engine of the Peugeot Speedfight?
Speedfight The disassembly of the Peugeot Speedfight engine can be done by loosening the screws that hold it to its housing: once these screws have been loosene…
How to Dismantle the Engine of the Peugeot Speedfight?
How to Dismantle the Engine of the Peugeot Speedfight?
Speedfight To dismantle the engine of the Peugeot Speedfight, you need to loosen the screws that secure it to the frame supports, allowing for complete removal …
How to remove the engine from a Peugeot Speedfight?
How to remove the engine from a Peugeot Speedfight?
Speedfight To remove the engine from a Peugeot Speedfight, loosen the screws securing all the panels around the frame, particularly around the rear area where t…

How to replace the transmission oil seal on the KTM XC 250

This guide provides the main instructions for removing and replacing the transmission oil seal on the KTM XC 250 enduro bike, as well as the XC-W 250. First, place your bike on a stand and begin by removing the gear lever by unscrewing its bolt; then remove the transmission cover and use something thin and pointed to extract the oil seal, as shown in the video. At this point, correctly install the new oil seal, pressing it in until it is flush, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos