Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Peugeot Speedfight
Part: Engine

In order to disassemble the engine of the Peugeot Speedfight, you need to loosen the screws that fix it to the respective frame supports, so that it is possible to completely remove the engine: it will also be necessary to loosen the screws that fix the pipes and disconnect the connectors. At this point, it will be possible to proceed by loosening the screws that fix the cylinder to its seat, so that it can be removed together with the underlying piston. By also disconnecting the connecting rod, you will have access to the crankshaft and all the components present in the engine block, so that they can potentially be replaced.

Posted on 5 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the carburetor of the Peugeot Speedfight
How to disassemble the carburetor of the Peugeot Speedfight
Speedfight Today's steps will show us how to disassemble and replace the carburetor of the Peugeot Speedfight scooter. First, we put the scooter on the center s…
Instructions for Dismantling the Variator on a Peugeot Speedfight
Instructions for Dismantling the Variator on a Peugeot Speedfight
Speedfight In today's tutorial video, you will see the main instructions on how to dismantle the variator on a Peugeot Speedfight scooter. To dismantle the vari…
How to Dismantle and Clean the Carburettor of the Peugeot Speedfight
How to Dismantle and Clean the Carburettor of the Peugeot Speedfight
Speedfight This guide provides instructions to dismantle and clean the carburettor of the Peugeot Speedfight scooter. First, place the scooter on the centre sta…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos