Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Dismantling the Variator on a Peugeot Speedfight

Model: Peugeot Speedfight
Part:

Video tutorial

In today's tutorial video, you will see the main instructions on how to dismantle the variator on a Peugeot Speedfight scooter. To dismantle the variator, you need to remove the left side cover of the engine by unscrewing all its fixing screws; once removed, you can access the fan and the variator.

At this point, unscrew the central nut of the fan, using the appropriate tool to hold it in place, and remove it, then take out the variator along with the rollers. If necessary, replace it with the new one and reassemble the belt along with the variator and the fan!


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to replace the variator on the Peugeot Speedfight?
How to replace the variator on the Peugeot Speedfight?
Speedfight To replace the variator on the Peugeot Speedfight, you need to loosen the screws securing the transmission protection panel: this is located on the r…
How to Replace the Variator on the Peugeot Speedfight?
How to Replace the Variator on the Peugeot Speedfight?
Speedfight To replace the variator on the Peugeot Speedfight, you need to loosen the screws that secure the transmission cover located on the left side of the s…
Replacing the Rollers and Variator on the Peugeot Speedfight 50
Replacing the Rollers and Variator on the Peugeot Speedfight 50
Speedfight Today's instructions will show you the procedure for disassembling and replacing the rollers and variator of the Peugeot Speedfight 50 scooter. First…

How to Replace the USB Socket on the Benelli TRK 502?

To replace the USB socket on the Benelli TRK 502, loosen the screws securing the left side panel of the motorcycle, located just below the handlebars: once this panel is freed, you can remove it and locate the USB socket connector. By disconnecting this connector, you can pull the socket out of its housing: then connect the new socket to the connector, inserting it into its housing. After installation, check that the socket works by reinstalling the panel.

Watch the video!


by ScegliAuto

More videos