Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Variator on the Peugeot Speedfight?

Model: Peugeot Speedfight
Part:

Video tutorial

To replace the variator on the Peugeot Speedfight, you need to loosen the screws that secure the transmission cover located on the left side of the scooter near the rear wheel. Once this cover is removed, you will have access to the underlying variator, which can be removed from its housing by loosening the central nut. Once the drive belt is also removed from its seat, you can insert the new variator and reposition the belt around it, securing it with the corresponding bolt.


Updated on 27 September 2026 by ScegliAuto


Related tutorials

How to replace the variator on the Peugeot Speedfight?
How to replace the variator on the Peugeot Speedfight?
Speedfight To replace the variator on the Peugeot Speedfight, you need to loosen the screws securing the transmission protection panel: this is located on the r…
Replacement of the clutch of the Peugeot Speedfight 50
Replacement of the clutch of the Peugeot Speedfight 50
Speedfight Today's main steps will show us how to disassemble and replace the clutch of the Peugeot Speedfight 50 scooter. First of all, we put the scooter on t…
Instructions for Replacing the Spark Plug on a Peugeot Speedfight 3 RS
Instructions for Replacing the Spark Plug on a Peugeot Speedfight 3 RS
Speedfight This guide outlines the main steps to remove and replace the spark plug on a Peugeot Speedfight 3 RS scooter. First, lift the seat of your scooter an…

How to Replace the Spark Plug on a Honda Dio Scooter?

In this tutorial, see how to replace the spark plug on a Honda Dio scooter, a very simple and quick operation. First, ensure the engine is cool enough to work safely, then open the seat and, by unscrewing all the indicated screws, remove the entire internal plastic frame. Next, disconnect the spark plug power connector, grasp the spark plug with the appropriate socket spanner, and unscrew it. At this point, simply insert the replacement, tighten it gently, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos