Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Spark Plug on a Peugeot Speedfight 3 RS

Model: Peugeot Speedfight
Part: Spark plugs

Video tutorial

This guide outlines the main steps to remove and replace the spark plug on a Peugeot Speedfight 3 RS scooter. First, lift the seat of your scooter and remove the screws from the storage compartment to lift it. Next, disconnect the spark plug cap and unscrew the spark plug using a socket spanner.

Replace it with a new one of the correct type, inserting it properly by hand first, then tightening it with the spanner. Finally, reassemble the storage compartment!


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Replace the Piston on a Peugeot Speedfight?
How to Replace the Piston on a Peugeot Speedfight?
Speedfight To replace the piston on a Peugeot Speedfight, loosen the screws securing the seat and the protective panel in the under-seat compartment at the fron…
How do you replace the piston of the Peugeot Speedfight?
How do you replace the piston of the Peugeot Speedfight?
Speedfight To replace the piston of the Peugeot Speedfight, it is necessary to loosen the screws that secure the motorcycle's seat and also the corresponding pa…
Replacing the Rollers and Variator on the Peugeot Speedfight 50
Replacing the Rollers and Variator on the Peugeot Speedfight 50
Speedfight Today's instructions will show you the procedure for disassembling and replacing the rollers and variator of the Peugeot Speedfight 50 scooter. First…

How to change the engine oil in the Aprilia Tuono V4?

In this tutorial, you will learn how to change the engine oil in the Aprilia Tuono V4, a very simple and quick operation. First, ensure the engine is cool enough to work safely, then position a container underneath the bike, locate the drain plug, and unscrew it using a socket spanner. Allow all the oil in the system to drain out, then unscrew the old filter and tighten both the new filter and the drain plug. At this point, simply pour the required amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos