Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the piston of the Peugeot Speedfight?

Model: Peugeot Speedfight
Part: Engine

Video tutorial

To replace the piston of the Peugeot Speedfight, it is necessary to loosen the screws that secure the motorcycle's seat and also the corresponding panel that covers the under-seat compartment located at the front. Once this panel is removed, it will be possible to loosen the top part of the engine block, where the cylinder is located and must be properly detached by unscrewing the fixing screws and disconnecting the coil and spark plug.

The piston inside can then be freed from the connecting rod by expanding the fixing ring and the appropriate pin; in this way, the new piston can be inserted, assembling all the components that were just disassembled.


Posted on 25 March 2025 by ScegliAuto


Related tutorials

How to Replace the Piston on a Peugeot Speedfight?
How to Replace the Piston on a Peugeot Speedfight?
Speedfight To replace the piston on a Peugeot Speedfight, loosen the screws securing the seat and the protective panel in the under-seat compartment at the fron…
How do you disassemble the engine of the Peugeot Speedfight?
How do you disassemble the engine of the Peugeot Speedfight?
Speedfight The disassembly of the Peugeot Speedfight engine can be done by loosening the screws that hold it to its housing: once these screws have been loosene…
How do you disassemble the engine of the Peugeot Speedfight?
How do you disassemble the engine of the Peugeot Speedfight?
Speedfight The engine of the Peugeot Speedfight can be disassembled by loosening the screws that fix it to its housing in the center of the frame, also disconne…

How to replace the transmission oil seal on the KTM XC 250

This guide provides the main instructions for removing and replacing the transmission oil seal on the KTM XC 250 enduro bike, as well as the XC-W 250. First, place your bike on a stand and begin by removing the gear lever by unscrewing its bolt; then remove the transmission cover and use something thin and pointed to extract the oil seal, as shown in the video. At this point, correctly install the new oil seal, pressing it in until it is flush, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos