Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Carburettor Jets on a Peugeot Speedfight

Model: Peugeot Speedfight
Part: Carburetor

Video tutorial

In this brief guide, you will find instructions to dismantle the carburettor and replace the jets on the Peugeot Speedfight scooter. First, place the scooter on its stand and open the seat, removing the internal compartment to access the top of the engine.

Disconnect the carburettor's intake manifold, then disconnect the throttle cable as shown in the video. Next, unscrew the screws of the carburettor's lower bowl to access the main jets; replace them if necessary with new original ones, then reassemble everything.


Posted on 6 July 2026 by ScegliAuto


Related tutorials

How to Remove the Carburettor from the Peugeot Speedfight
How to Remove the Carburettor from the Peugeot Speedfight
Speedfight Today's steps will show you how to disassemble and replace the carburettor of the Peugeot Speedfight scooter. First, place the scooter on the centre …
How to Remove the Carburettor from a Peugeot Speedfight
How to Remove the Carburettor from a Peugeot Speedfight
Speedfight Start by removing the air filter block from your Peugeot Speedfight, which is connected to the carburettor. Next, disconnect the various hoses connec…
How to Dismantle and Clean the Carburettor of the Peugeot Speedfight
How to Dismantle and Clean the Carburettor of the Peugeot Speedfight
Speedfight This guide provides instructions to dismantle and clean the carburettor of the Peugeot Speedfight scooter. First, place the scooter on the centre sta…

How to Replace the USB Socket on the Benelli TRK 502?

To replace the USB socket on the Benelli TRK 502, loosen the screws securing the left side panel of the motorcycle, located just below the handlebars: once this panel is freed, you can remove it and locate the USB socket connector. By disconnecting this connector, you can pull the socket out of its housing: then connect the new socket to the connector, inserting it into its housing. After installation, check that the socket works by reinstalling the panel.

Watch the video!


by ScegliAuto

More videos