Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Carburettor from the Peugeot Speedfight

Model: Peugeot Speedfight
Part: Carburetor

Video tutorial

Today's steps will show you how to disassemble and replace the carburettor of the Peugeot Speedfight scooter. First, place the scooter on the centre stand and begin removing the plastic side fairing and the air filter box; then disconnect the fuel hose from the carburettor and the throttle cable, as shown in the video.

At this point, disconnect the carburettor from the intake manifold by unscrewing the fixing screws; remove and service or clean the carburettor, replacing it if necessary!


Updated on 7 October 2026 by ScegliAuto


Related tutorials

How to Remove the Carburettor from a Peugeot Speedfight
How to Remove the Carburettor from a Peugeot Speedfight
Speedfight Start by removing the air filter block from your Peugeot Speedfight, which is connected to the carburettor. Next, disconnect the various hoses connec…
How to Dismantle and Clean the Carburettor of the Peugeot Speedfight
How to Dismantle and Clean the Carburettor of the Peugeot Speedfight
Speedfight This guide provides instructions to dismantle and clean the carburettor of the Peugeot Speedfight scooter. First, place the scooter on the centre sta…
How to Replace the Carburettor Jets on a Peugeot Speedfight
How to Replace the Carburettor Jets on a Peugeot Speedfight
Speedfight In this brief guide, you will find instructions to dismantle the carburettor and replace the jets on the Peugeot Speedfight scooter. First, place the…

How to Replace the USB Socket on the Benelli TRK 502?

To replace the USB socket on the Benelli TRK 502, loosen the screws securing the left side panel of the motorcycle, located just below the handlebars: once this panel is freed, you can remove it and locate the USB socket connector. By disconnecting this connector, you can pull the socket out of its housing: then connect the new socket to the connector, inserting it into its housing. After installation, check that the socket works by reinstalling the panel.

Watch the video!


by ScegliAuto

More videos