Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Start by removing the air filter block from your Peugeot Speedfight, which is connected to the carburettor. Next, disconnect the various hoses connected to the carburettor by unclipping the securing clips, taking care to avoid fuel spills. Once done, disconnect the throttle cable connected to the carburettor's slide by unscrewing the securing screws. At this point, unscrew and remove the screws and bolts that secure the carburettor to the engine manifold. Once you have completed this last step, you can remove the carburettor, and you will have finished the disassembly.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the carburetor of the Peugeot Speedfight
How to disassemble the carburetor of the Peugeot Speedfight
Speedfight Today's steps will show us how to disassemble and replace the carburetor of the Peugeot Speedfight scooter. First, we put the scooter on the center s…
How to Dismantle and Clean the Carburettor of the Peugeot Speedfight
How to Dismantle and Clean the Carburettor of the Peugeot Speedfight
Speedfight This guide provides instructions to dismantle and clean the carburettor of the Peugeot Speedfight scooter. First, place the scooter on the centre sta…
How to Replace the Carburettor Jets on a Peugeot Speedfight
How to Replace the Carburettor Jets on a Peugeot Speedfight
Speedfight In this brief guide, you will find instructions to dismantle the carburettor and replace the jets on the Peugeot Speedfight scooter. First, place the…

How to replace the engine oil in the Ducati Monster S2R 1000?

In this tutorial we can see how to replace the motor oil in the Ducati Monster S2R 1000, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then place a container underneath it, locate the drain plug and unscrew it using a hex key. Next, unscrew the cap of the secondary filter, remove it and clean it from any dirt residue. At this point, all that remains is to unscrew the main filter, tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos