Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ducati Monster 696
Part:

Today's guide illustrates how to remove and replace the timing belt on a Ducati Monster 696, following the instructions provided below. First, place the motorcycle on a stand and begin by removing the exhaust, unscrewing the nuts from the manifold and cylinder head; then unscrew the screws from the timing cover to access the belt, as shown in the video. At this point, take the necessary references for replacing the timing belt; then remove it and replace it with the new one, following the video tutorial to the end!

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the Ducati Monster 696?
How do you replace the exhaust pipe of the Ducati Monster 696?
Monster 696 The replacement of the exhaust of the Ducati Monster 696 is done by loosening the screws that fix the exhaust terminal to its supports: these screws …
How to Replace the Rear Mudguard on the Ducati Monster 696?
How to Replace the Rear Mudguard on the Ducati Monster 696?
Monster 696 In this tutorial, see how to replace the rear mudguard on the Ducati Monster 696, a very simple and quick operation. First, remove the seat, then tem…
How to replace the battery of the Ducati Monster 696
How to replace the battery of the Ducati Monster 696
Monster 696 Below we will see the instructions that will allow us to disassemble and replace the battery of the Ducati Monster 696. First, we put the motorcycle …

How to Replace the Spark Plug in a Yamaha FZ 150

In this tutorial, you will see how to replace the spark plug in a Yamaha FZ 150, an extremely simple and quick operation. First, wait until the engine is sufficiently cool and ensure the key is not inserted. Then, move to the right side of the motorcycle and locate the spark plug. Disconnect the power connector, grasp the spark plug with a 16mm socket, and carefully unscrew it. At this point, insert the replacement, tighten it without applying excessive force, and reconnect the connector. Finally, start the engine to verify that the new spark plug functions correctly.

Watch the video!


by ScegliAuto

More videos