Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Silencer on a Ducati Monster 696

Model: Ducati Monster 696
Part: Exhaust muffler

Video tutorial

This guide will show you how to remove and replace the silencer on a Ducati Monster 696 motorcycle, following the instructions below. First, place your motorcycle on a stand and start by unscrewing the fixing screw for the exhaust bracket.

Then, disconnect the spring to remove the silencer from the exhaust manifold, as shown in the video. At this point, modify the manifold to install the new exhaust terminals; replace the entire exhaust if necessary by unscrewing the manifold nuts and applying the reverse procedure for reassembly!


Updated on 8 August 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Mudguard on the Ducati Monster 696?
How to Replace the Rear Mudguard on the Ducati Monster 696?
Monster 696 In this tutorial, see how to replace the rear mudguard on the Ducati Monster 696, a very simple and quick operation. First, remove the seat, then tem…
How to Replace the Exhaust on the Ducati Monster 696?
How to Replace the Exhaust on the Ducati Monster 696?
Monster 696 To replace the exhaust on the Ducati Monster 696, loosen the screws that secure the exhaust tip to its supports: these screws are located on the righ…
How to Replace the Timing Belt on a Ducati Monster 696
How to Replace the Timing Belt on a Ducati Monster 696
Monster 696 Today's guide illustrates how to remove and replace the timing belt on a Ducati Monster 696, following the instructions provided below. First, place …

How to Clean the Carburettor on an LML Star?

To clean the carburettor on an LML Star, you first need to remove this part from its housing: to disassemble the carburettor, you must remove the right side panel of the scooter, near the rear wheel. Once this panel is removed, you will locate the carburettor underneath by unscrewing the appropriate fixing screws. Then, disconnect the fuel lines and completely remove the carburettor: you can now clean it with a blast of compressed air, then refit all the removed components.

Watch the video!


by ScegliAuto

More videos