|
Do it yourself
| |||
| ||||
|
Model: Benelli Trk 502
Today, we will go through the steps and main instructions on how to remove and replace the rear brake pads on the Benelli TRK 502 motorcycle. First, place your motorcycle on the centre stand and start unscrewing the fixing screws of the rear brake caliper to remove it from the disc; then, press the caliper piston to retract it, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones; clean the caliper of any dirt, then reassemble the braking system!
Updated on 30 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Trk 502
Today, we will go through the necessary instructions to remove and replace the rear brake pads on the Benelli TRK 502 motorcycle. First, place the mo…
Trk 502
Today, remove and replace the rear brake pads on a Benelli TRK 502 by following these steps. First, unscrew the bolts securing the rear brake caliper…
Trk 502
To replace the brake pads on a Benelli TRK 502, first remove the speed sensor by unscrewing the bolt and disconnecting the corresponding wire. At thi…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
