Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on Benelli TRK 502

Model: Benelli Trk 502
Part: Clock

Video tutorial

In this tutorial, we will see how to set the time on the Benelli TRK 502, a very simple and quick operation, to be performed after disconnecting the battery or following the switch to daylight saving time. First, insert the key and leave it in the initial position, then press and hold the "SET" button located on the right knob, simultaneously turn on the dashboard and release the button once the clock starts to flash.

Next, adjust the hour by quickly pressing the button, hold it again to switch to minutes, and adjust them in the same way before saving the setting.


Posted on 29 March 2026 by ScegliAuto


Related tutorials

How to Set the Time on the Benelli TRK 502?
How to Set the Time on the Benelli TRK 502?
Trk 502 In this tutorial, you will see how to set the time on the Benelli TRK 502, an extremely simple and quick operation, to be done, for example, after di…
How to Reset the Engine Light on a Benelli TRK 502
How to Reset the Engine Light on a Benelli TRK 502
Trk 502 Before you can begin, sit on the seat of your Benelli TRK 502. Start by setting the engine start switch to the active position. Then, fully rotate an…
Replacing the Coolant in the Benelli TRK 502
Replacing the Coolant in the Benelli TRK 502
Trk 502 This guide outlines the procedure for replacing the coolant or antifreeze in the Benelli TRK 502. First, place your motorcycle on the centre stand an…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos