Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on the Benelli TRK 502?

Model: Benelli Trk 502
Part: Clock

Video tutorial

In this tutorial, you will see how to set the time on the Benelli TRK 502, an extremely simple and quick operation, to be done, for example, after disconnecting the battery or after the switch to daylight saving time. First, insert the key, then turn on the instrument cluster and hold down the left button on the dashboard until the clock starts to flash.

Next, adjust the hour with the right button, switch to minutes with the left button, and similarly adjust the minutes. To save the setting, simply press the left button one last time.


Posted on 22 April 2026 by ScegliAuto


Related tutorials

How to Reset the Engine Light on a Benelli TRK 502
How to Reset the Engine Light on a Benelli TRK 502
Trk 502 Before you can begin, sit on the seat of your Benelli TRK 502. Start by setting the engine start switch to the active position. Then, fully rotate an…
How to change the engine oil on the Benelli TRK 502?
Trk 502 To change the engine oil on the Benelli TRK 502, loosen the drain plug located at the bottom centre of the bike: once this plug is removed, collect t…
How to Change the Coolant on the Benelli TRK 502
How to Change the Coolant on the Benelli TRK 502
Trk 502 In this video tutorial, you will see how to bleed the cooling system and replace the coolant on a Benelli TRK 502 in simple steps. To remove the old …

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos