Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Coolant in the Benelli TRK 502

Model: Benelli Trk 502
Part: Antifreeze coolant

Video tutorial

This guide outlines the procedure for replacing the coolant or antifreeze in the Benelli TRK 502. First, place your motorcycle on the centre stand and start by unscrewing the coolant drain screw located under the engine on the left side of the bike, as shown in the video.

After draining, open the cap of the coolant reservoir; then pour in the new coolant, filling the reservoir to the maximum level, following the video tutorial to the end!


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How do you replace the coolant of the Benelli TRK 502?
How do you replace the coolant of the Benelli TRK 502?
Trk 502 It will be possible to replace the coolant of the Benelli TRK 502 by widening the ring that connects the sleeve for the passage of the liquid to the …
How to Change the Coolant on the Benelli TRK 502
How to Change the Coolant on the Benelli TRK 502
Trk 502 In this video tutorial, you will see how to bleed the cooling system and replace the coolant on a Benelli TRK 502 in simple steps. To remove the old …
How to Replace the Radiator and Coolant Hoses on the Benelli TRK 502
How to Replace the Radiator and Coolant Hoses on the Benelli TRK 502
Trk 502 This guide provides instructions for replacing the radiator and engine coolant hoses on the Benelli TRK 502 motorcycle. First, place the motorcycle o…

How to Change the Engine Oil in the Suzuki GSX-S1000?

Changing the engine oil in the Suzuki GSX-S1000, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the engine is sufficiently cool, then position a container underneath and remove the lower fairing. Next, locate the drain hole bolt, unscrew it using a socket spanner, and allow all the oil in the system to drain out. At this point, simply unscrew the old filter, tighten both the replacement and the bolt, and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos