Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the coolant of the Benelli TRK 502?

Model: Benelli Trk 502
Part: Antifreeze coolant

Video tutorial

It will be possible to replace the coolant of the Benelli TRK 502 by widening the ring that connects the sleeve for the passage of the liquid to the rest of the system: once the sleeve has been detached, it will be possible to collect all the coolant inside a properly positioned container.

Once the liquid has completely drained out, it will be possible to top up with the necessary amount of coolant: it will need to be inserted through the vent located on the right side of the motorcycle, immediately under the fuel tank.


Posted on 25 May 2025 by ScegliAuto


Related tutorials

How to Change the Coolant on the Benelli TRK 502
How to Change the Coolant on the Benelli TRK 502
Trk 502 In this video tutorial, you will see how to bleed the cooling system and replace the coolant on a Benelli TRK 502 in simple steps. To remove the old …
How to Replace the Radiator and Coolant Hoses on the Benelli TRK 502
How to Replace the Radiator and Coolant Hoses on the Benelli TRK 502
Trk 502 This guide provides instructions for replacing the radiator and engine coolant hoses on the Benelli TRK 502 motorcycle. First, place the motorcycle o…
How to Change the Radiator Fluid on a Benelli TRK 502
How to Change the Radiator Fluid on a Benelli TRK 502
Trk 502 In today's video, you will learn how to remove and replace the radiator fluid or antifreeze on a 2020 Benelli TRK 502 motorcycle in simple and quick …

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos