Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Additional Control Unit on Benelli TRK

Model: Benelli Trk 502
Part: Control unit

Video tutorial

In this video, we will look at an additional control unit for the Benelli TRK, which can be found on eBay under code 353532163799 for £100.00, with free delivery. The purpose of the control unit is to improve throttle response and power delivery compared to the standard mapping.

To install it, remove the fuel tank, disconnect the air temperature sensor, and insert the control unit in bridge mode between the sensor and the original system. The result is a more responsive bike, with a modified exhaust sound, especially when paired with an aftermarket exhaust.

Remember that modifications to the control unit may void the warranty if they cause issues with the original ECU. In any case, the performance gain is minimal unless paired with a free-flow exhaust.


Posted on 8 April 2026 by ScegliAuto


Related tutorials

How do you reset the ECU of the Benelli TRK 502?
How do you reset the ECU of the Benelli TRK 502?
Trk 502 In order to reset the ECU of the Benelli TRK 502, you need to connect a scanner to the vehicle's OBD port: this port will be located between the inst…
How to Reset the ECU on the Benelli TRK 502
How to Reset the ECU on the Benelli TRK 502
Trk 502 In this video tutorial, you will see how to reset the ECU on the Benelli TRK 502 motorcycle, resetting the engine warning light by following the inst…
How to Reset the Engine Warning Light on the Benelli TRK 502
How to Reset the Engine Warning Light on the Benelli TRK 502
Trk 502 This guide will show you how to reset the engine warning light or the ECU of the Benelli TRK 502 motorcycle. First, place the bike on its stand and f…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos