Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Warning Light on the Benelli TRK 502

Model: Benelli Trk 502
Part: Warning light – error code

Video tutorial

This guide will show you how to reset the engine warning light or the ECU of the Benelli TRK 502 motorcycle. First, place the bike on its stand and fully twist the throttle grip; then turn on the ignition and wait for about five seconds before turning it off again, as shown in the video.

At this point, release the throttle grip and turn the ignition on and off a couple of times; this will reset the ECU and the engine malfunction light, finally starting the engine to complete the process!


Updated on 15 August 2026 by ScegliAuto


Related tutorials

How to Reset the Engine Light on a Benelli TRK 502
How to Reset the Engine Light on a Benelli TRK 502
Trk 502 Before you can begin, sit on the seat of your Benelli TRK 502. Start by setting the engine start switch to the active position. Then, fully rotate an…
How to Reset the ECU on the Benelli TRK 502
How to Reset the ECU on the Benelli TRK 502
Trk 502 In this video tutorial, you will see how to reset the ECU on the Benelli TRK 502 motorcycle, resetting the engine warning light by following the inst…
How to Replace the Grips on a Benelli TRK 502?
How to Replace the Grips on a Benelli TRK 502?
Trk 502 To replace the grips on a Benelli TRK 502, loosen the bolts located at the end of the grips: this will allow you to detach the handguard from the end…

How to Change the Engine Oil in the Suzuki GSX-S1000?

Changing the engine oil in the Suzuki GSX-S1000, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the engine is sufficiently cool, then position a container underneath and remove the lower fairing. Next, locate the drain hole bolt, unscrew it using a socket spanner, and allow all the oil in the system to drain out. At this point, simply unscrew the old filter, tighten both the replacement and the bolt, and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos