Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the ECU on the Benelli TRK 502

Model: Benelli Trk 502
Part: Warning light – error code

Video tutorial

In this video tutorial, you will see how to reset the ECU on the Benelli TRK 502 motorcycle, resetting the engine warning light by following the instructions below. First, fully twist the throttle grip and keep it turned for the rest of the procedure; then turn on the ignition by turning the key, and turn the ignition off and on five times, as shown in the video.

At this point, start the engine and you will see that the annoying engine warning light that sometimes appears on the dashboard will disappear.


Updated on 24 April 2026 by ScegliAuto


Related tutorials

How do you reset the ECU of the Benelli TRK 502?
How do you reset the ECU of the Benelli TRK 502?
Trk 502 In order to reset the ECU of the Benelli TRK 502, you need to connect a scanner to the vehicle's OBD port: this port will be located between the inst…
How to Reset the Engine Warning Light on the Benelli TRK 502
How to Reset the Engine Warning Light on the Benelli TRK 502
Trk 502 This guide will show you how to reset the engine warning light or the ECU of the Benelli TRK 502 motorcycle. First, place the bike on its stand and f…
How to Reset the Engine Light on a Benelli TRK 502
How to Reset the Engine Light on a Benelli TRK 502
Trk 502 Before you can begin, sit on the seat of your Benelli TRK 502. Start by setting the engine start switch to the active position. Then, fully rotate an…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos