Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to reset the ECU of the Benelli TRK 502, you need to connect a scanner to the vehicle's OBD port: this port will be located between the instrument panel and the fuel tank. Once the scanner is connected, you can ensure that all errors and settings in the ECU can be cleared and reset. After disconnecting the scanner, you can turn on the instrument panel to verify that everything has been restored to the initial mode.

Posted on 18 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Engine Warning Light on the Benelli TRK 502
How to Reset the Engine Warning Light on the Benelli TRK 502
Trk 502 This guide will show you how to reset the engine warning light or the ECU of the Benelli TRK 502 motorcycle. First, place the bike on its stand and f…
How to Reset the ECU on the Benelli TRK 502
How to Reset the ECU on the Benelli TRK 502
Trk 502 In this video tutorial, you will see how to reset the ECU on the Benelli TRK 502 motorcycle, resetting the engine warning light by following the inst…
How to Reset the Engine Light on a Benelli TRK 502
How to Reset the Engine Light on a Benelli TRK 502
Trk 502 Before you can begin, sit on the seat of your Benelli TRK 502. Start by setting the engine start switch to the active position. Then, fully rotate an…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos