Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil of a Benelli TRK 502X?

Model: Benelli Trk 502
Part: Engine oil

Video tutorial

To change the motor oil of a Benelli TRK 502X, start by briefly warming up the engine to make the oil more fluid and facilitate its drainage. Turn off the engine and place the motorcycle on a central stand to ensure stability.

Locate the oil drain plug under the engine. Prepare a large enough container to collect the used oil and, using a wrench, unscrew the drain plug.

Let it drain completely for a few minutes, making sure no residue remains. Once the draining is complete, reposition the drain plug making sure it is tightly secured.

Then, locate the oil fill plug, usually located on the side of the engine. Use a funnel to pour in the new oil, following the specifications indicated in the motorcycle manual for the quantity and type of suitable lubricant.

After pouring in the oil, close the fill plug, start the engine for a few minutes, then turn it off and check for leaks or abnormalities.


Posted on 17 September 2025 by ScegliAuto


Related tutorials

How do you replace the engine oil of the Benelli TRK 502X?
How do you replace the engine oil of the Benelli TRK 502X?
Trk 502 The oil change on the Benelli TRK 502X is done by loosening the drain plug of the tank containing the oil, which will be located in the lower central…
How do you replace the front brake pads of the Benelli TRK 502X?
How do you replace the front brake pads of the Benelli TRK 502X?
Trk 502 To replace the front brake pads of the Benelli TRK 502X, you need to loosen the screws that secure the brake caliper to the corresponding disc: once …
How to Replace the Exhaust on a Benelli TRK 502X?
How to Replace the Exhaust on a Benelli TRK 502X?
Trk 502 To replace the exhaust on the Benelli TRK 502X, loosen the screws securing the exhaust end can to its housing, located on the right side of the motor…

How to Set the Time on the Suzuki V-Strom 650?

In this tutorial, learn how to set the time on the Suzuki V-Strom 650, a simple and quick operation, for instance, after replacing the battery or switching to daylight saving time. First, insert the key, then turn on the instrument cluster and press both the "MODE" button upwards and the button to the left of the speedometer. Wait for the time to start flashing, release both buttons, and adjust the clock using the button on the dashboard. To save the setting, wait a few seconds.

Watch the video!


by ScegliAuto

More videos