|
Do it yourself
| |||
| ||||
|
Model: Benelli Trk 502
To replace the front brake pads of the Benelli TRK 502X, you need to loosen the screws that secure the brake caliper to the corresponding disc: once the caliper is freed from its seat, you can remove the pin that locks the pads inside the caliper so that they can be completely removed. After removing the pads, you can install the new ones inside the caliper: it can now be repositioned on the disc so that it can be fixed and its operation verified.
Posted on 26 April 2025 by ScegliAuto
Video tutorial
Related tutorials
Trk 502
To replace the rear brake pads of the Benelli TRK 502X, you need to loosen the screws that secure the corresponding caliper, so that it can be detach…
Trk 502
To replace the rear brake pads on a Benelli TRK 502X, loosen the screws that secure the brake caliper to its disc. Once the caliper screws are remove…
Trk 502
To replace the front brake pads on a Benelli TRK 502, remove the pins located at the top and bottom of the caliper to free the pads inside. Once the …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
